The Think-Pair-Share (TPS) strategy makes the learning environment interactive, lively, collaborative and democratic. It allows students to interact; accept information; develop collaborative discussion skills; refine their thinking; and participate effectively in the classroom. In this study, the researchers investigated the effect of the collaborative discussion strategy (think-pair-share) on developing students' skills in solving engineering mathematical problems. Once we had confirmed the validity and reliability of the tools, we used the quasi-experimental approach. The study sample consisted of 66 students divided into two groups: Namely, an experimental group, which comprised 33 students who studied mathematics using the (think-pair-share) strategy; and a control group, which comprised 33 students who studied in the traditional way. Both groups sat for a pretest and post-test in mathematics. The test results showed that the use of the TPS strategy had a positive effect on developing problem-solving skills compared to the traditional method. In light of these results, the study recommended the use of TPS strategy to improve the skills of students in solving engineering mathematical problems.

In recent years, educational robotics has gained ground in educational policy around the world, and primary education is no exception. However, there has not yet been a thorough synthesis of methodologically appropriate empirical research on the effects of robotics upon cognitive performance among primary school students, which this paper attempted to do. Following literature screening, a total of eight studies published between 2018 and 2022 with a sample size of 567 children met inclusion criteria and were meta-analyzed. Resultantly, a medium aggregate effect size in favor of robotics experiments emerged (standardized mean difference of .641), which was significantly higher compared to non-robotics learning (p <.01). No between-study heterogeneity was detected. Subgroup analysis revealed a slightly larger overall effect for interventions on first- to third-graders rather than those in grades 4-6. Additionally, the analysis indicates that in order to enhance cognitive abilities in primary students, robotics interventions should be no longer than four weeks and involve robot construction. Based on the findings, implications, and suggestions are outlined for future research and practice.

The need for early comprehension of scientific concepts in elementary school students is crucial. However, studies have indicated that some students lack a fundamental understanding of such concepts, highlighting the importance of effective teaching methods to improve scientific literacy at an early age. Therefore, this study aimed to determine the ability of Project-Based Learning in Science, Technology, Engineering, Art, and Mathematics (STEAM-PjBL) to improve students' scientific literacy, knowledge, and application of foundational scientific principles. A quasi-experimental methodology was employed, involving 22 female and 26 male fourth-grade elementary school students as participants. The study administered a Scientific Literacy Test (SLT) treatment to the students, followed by unpaired and paired t-tests to examine the impact of the STEAM-PjBL model on their scientific literacy skills. The results showed that STEAM-PjBL improved students' scientific literacy skills significantly more than traditional instruction. The experimental group outperformed the control group in the post-test, indicating the effectiveness of STEAM-PjBL. Therefore, the study recommends the adoption of the STEAM-PjBL model by elementary school teachers to improve students' understanding of fundamental scientific concepts.

The objective of this study is to create a tool for evaluating teachers’ effectiveness in boarding schools. Planning and preparation stages, instrument testing, and measurements were used in this study to implement research on the creation of the Mardapi model instrument. In order to generate instrument items, the planning and preparation stage tasks included a literature assessment of teacher performance appraisal manuals. Data were gathered utilizing documentation approaches, and descriptive and qualitative analysis was performed. Six specialists validated the built instruments, which were subsequently put through limited testing at two boarding schools and extensive trials at nine boarding schools in Surakarta residency area. The Aiken formula was used to examine the expert’s evaluation data, and confirmatory factor analysis was used to analyze the test results. The results of this study indicate that the instrument for assessing teacher performance in boarding schools meets the validity criteria. This is indicated by the existence of loading factor values ranging from .51 to .72 (>.4) and t-sign values ranging from 4.75 to 9.25 (>1.96) and meeting the requirements of a fit model since Chi-square = 1307.95 < 2524 (2*df), p-value = .17956 (>.05), and RSMEA value = .014 (<.08). The instrument items are reliable assessment packages, and this is shown by the reliability value of omega .967 > .70. Because there is a guarantee of validity and reliability, the test can be used to further assess teacher performance in boarding schools.

In this article, we discuss the impacts of using 3D printing in education. Our primary goal is to evaluate the pedagogical impact of lessons utilizing 3D printing. We asked one hundred ninety students in four reference schools about the acceptability of existing 3D materials for teaching. Although the results show high attractiveness for the target group, it turned out that the available lessons primarily focus on the acquisition of technical skills and do not use the potential of education in other areas. We, therefore, proposed a concept for creating multidisciplinary teaching lessons that connect the technical part with other educational areas. We show the application of our concept in a newly developed lesson in biology, where we again evaluate its acceptance among the students. The results show that although the multidisciplinary lessons are more complex, they are still acceptable to the students, and, most importantly, they add significant educational value. Finally, we discuss the possibilities of incorporating 3D printing into the teaching curriculum. We also use a selected use case to illustrate the real-world problems we have encountered.

This study aims to analyse the relationship between critical thinking and the learning experience provided by instructors through active learning models, specifically Project-based Learning (PjBL) and Simulation-based Learning (SBL), to the potential achievement of academic performance in undergraduate students. The main analysis technique employed in this research was logistic regression, with additional analysis techniques including discriminant validity, EFA, as well as Kendall’s and Spearman’s correlation, serving as a robustness check. The results of this study indicate significant correlations and effects of critical thinking (CT) on academic performance. Higher levels of CT are associated with a greater likelihood of achieving academic excellence, as indicated by the cum laude distinction, compared to not attaining this distinction. Experiences of receiving PjBL (0.025; 6.816) and SBL (0.014; 14.35) predicted the potential for improving academic performance to reach cum laude recognition, relative to not achieving this distinction. Furthermore, other intercept factors need to be considered to achieve cum laude compared to not achieving cum laude. We recommend that policymakers in higher education, instructors, and others focus on enhancing critical thinking and utilizing both Pub and SBL as learning models to improve students’ academic performance.

STEM education is an irreplaceable movement of educational systems across the globe in the 21st century. Both Pre-K, K-12, and higher education institutions consider STEM as an innovative approach to integrate and reform the teaching and learning processes. The purpose of this paper is to examine the development of studies on STEM in the Early Childhood Education context from 1992 to 2022. We investigated a dataset of 308 scholarly works from the Clarivate Web of Science database and figured a diversified collection of research focuses on topics such as children’s readiness, outcomes, teachers’ competency in designing and implementing STEM activities, and the role of computational thinking and robotics. The findings of this paper revealed the dominant contribution of researchers from the USA regarding research quantity and impact, as well as their collaborations with researchers from Western countries. In addition, we also figured out the top influencing authors, documents, and journals as a suggestion for scholars who are new to this topic. However, we would like to note that our findings depended on the quality of the imported database from the WoS system, which covers top-tier journals only.

This research aimed to explore the influence of a robotic program using the robot kit "RoboBuilder RQ+110" on students' attitudes toward effective communication. The study used a quantitative research design and involved 475 grade 4 (10 years old) students from Malaysia's Selangor and Malacca states. A quasi-experimental research (pre-test & post-test) approach with control and experimental groups was adopted, and the data were analyzed with inferential statistical test and repeated measures analysis of variance (ANOVA) using SPSS 25 software at 0.05 significance level. Questionnaires were administered to collect data from the experimental and control groups. The results showed statistically significant changes (α ≤ .05) in attitudes toward effective communication for the experimental group that received a robotics program compared with the control group. The study results suggest that innovative technological tools or programs such as robotics programs are recommended as innovative science, technology, engineering, and mathematics (STEM) program rooted in constructivism to improve students' attitudes toward effective communication.

In this article, we present the results of empirical research using a combination of quantitative and qualitative methodology, in which we examined the achievements and difficulties of sixth-grade Slovenian primary school students in decimal numbers at the conceptual and procedural knowledge level. The achievements of the students (N = 100) showed that they statistically significantly (z = -7,53, p < .001) better mastered procedural knowledge (M = 0.60, SD = 0.22) than conceptual knowledge (M = 0.37, SD = 0.17) of decimal numbers. Difficulties are related to both procedural and conceptual knowledge, but significantly more students have difficulties at the level of conceptual knowledge. At the level of procedural knowledge, or in the execution of arithmetic operations with decimal numbers, we observed difficulties in transforming text notation into numerical expressions, difficulties in placing the decimal point in multiplication and division, and insufficient automation of mathematical operations with decimal numbers. At the level of conceptual knowledge of decimal numbers, the results indicate difficulties for students in understanding the place values of decimal numbers, in estimating the sum, product and quotient of decimals with reflection and in mathematical justification. In relation to difficulties in justification, we observed an insufficient understanding of the size relationship between decimal numbers and difficulties in expressing them in mathematical language. The results indicate that to overcome such difficulties in the learning and teaching of mathematics, more balance between procedural and conceptual knowledge is needed.