The purpose of this study is to develop a reliable and valid measurement tool which will reveal teachers’ self-competences in education process. Participants of the study are 300 teachers working at state primary schools in the province of Gaziantep, Results of the exploratory factor analysis administered to the scale in order to determine its construct validity, indicated that it has four sub-dimensions. In accordance with the results of confirmatory factor analysis RMSEA was measured .050 level fit index. The determined levels for GFI is found to be 0.88, whereas for AGFI, 0.85 for NFI, 0.94 for CFI 0.98 and 0.94 for RFI. Also, non normed fit index, (NNFI) has been observed as 0.97. Four dimensions of the scale which was composed of 23 items account for approximately 54% of the total variance. Cronbach's alpha coefficient of internal consistency was counted .86 for the first dimension; .82 for the second dimension, .67 for the third dimension, .70 for the fourth dimension, and .92 for the entire scale. The scale, developed in order to measure teachers’ self-efficacy in the teaching process, proved to be valid and reliable based on the results of the related analyses.

A university course project was developed and implemented in a biology course, focusing on environmental problems, to assess community awareness of childhood lead poisoning. A set of 385 questionnaires was generated and distributed in an urban community in North Carolina, USA. The study revealed that university education levels among the participants in the study significantly enhanced awareness of the body systems affected by lead poisoning, whereas age significantly enhanced awareness of the treatment of lead poisoning, its prevalence, causes, and the body systems affected. A majority of the participants showed interest in learning about lead poisoning (67%), but perhaps not only through a university seminar (42%). The project showed that involvement of students in innovative communication avenues between universities and communities, aimed at enhancing public awareness of a major environmental health risk, is possible through a biology course project in which students are part of the project’s development, implementation and analysis. Also, such an educational research project can, despite some limitations, offer educational opportunities that can intensify the students’ interest in the course and knowledge of the research topic.

The aim of this research is to determine the thoughts of the teachers about the concepts of "Smart Board", "Computer", "Internet" and "Social Media" from the Instructional technologies of the secondary school teachers with different branches through metaphors. In the research, a qualitative research model was used to identify teachers' thoughts in metaphor analysis from various branches about the use of instructional technologies in the national field. Within the scope of the qualitative research model, the phenomenology design was used. In order to find out what kind of thoughts teachers have about teaching materials from the participants "Smart Board / Computer / Internet / Social Media is like / similar to…..; Because ..." they were asked to complete their covenants. As a result of the research, 25 valid metaphors belonging to the concepts of smart board, computer, social media and 27 of internet concept were obtained from secondary school teachers. The most book (f = 4) metaphor for smart board concept, brain and memory (f = 2) metaphors for computer concept, most air (f = 3) and medicine, ocean, water (f = 2) metaphors for internet concept and the drug and virus (f = 2) metaphors related to the concept of social media. The metaphors of the concept of smart board are classified into 5 conceptual categories with common characteristics related to each other, 6 categories with common features related to computer and internet concepts, and 7 conceptual categories with social media concept related to each other. In the research, it was reached that the secondary school teachers expressed positive opinions about the concept of smart board and computer, partially negative about the concept of the internet but more negative opinions about the concept of social media.

Gender differences in mathematics learning outcomes are still evident in many countries participating in large scale international testing, as well as in national testing in Israel, the context in which the study reported here was conducted. The participants were 281 students from three Israeli elementary schools and were in grades 4 and 6. The students completed a questionnaire with items based on a selection of variables included in explanatory models for gender differences in mathematics. It was found that many students held gendered beliefs related to mathematics learning, particularly when the questions asked related to themselves or to significant others in their lives (parents and teachers); the views of the majority of students were gender neutral. When presented with two photographs -a man, and a woman- and asked who was the one more likely to work with mathematics, it was clear that the students’ choices and explanations echoed perceptions of mathematics as a male domain.

The purpose of this research is to evaluate the effectiveness of the activities, which are prepared by teaching techniques that support scientific creativity, on the scientific creativity levels of prospective pre-school teachers. In the research, combined design is used, which is one of the mixed research approaches. The study group of the research included a total of 46 prospective pre-school teachers who have studied in the Education Faculty of Kafkas University in 2016-2017 academic year. The applications were carried out in the "science education" which is one of the third-grade 5th-semester courses of the pre-primary education program. The application process was completed in 4 hours a week for a total of 40 hours. In the analysis of the quantitative data collected by Scientific Creativity Test, percentage calculation and t-test were used. Explanatory and inferential codes were used in the analysis of qualitative data obtained from the in-class observations. As a result of the research, it was seen that the course activities in which different techniques were used positively influenced the scientific creativity levels of the prospective teachers. Prospective teachers' level of skills involved in creative trait, creative process, and creative product sub-dimensions also developed. It has been suggested in the direction of these results that different techniques should be used together to develop scientific creativity.

Environmental learning in the 21st century requires students to have Higher Order Thinking Skills (HOTS). The purpose of this study was to measure HOTS students using Higher Order Thinking Skills Assessment based on Environmental Problem (HOTS-AEP). The research method used in this study was descriptive method with a total sample of 248 students consisting of Elementary School (ES), Junior High School (JHS), Bachelor Program (BP), and Master Program (MP). The results showed that students overall have a very low HOTS category. HOTS scores scale of 0-100 on ES (22.3) are still higher than JHS (20.2). Whereas at the university level, BP scores (19.9) are lower than MP (21.4). This showed that learning must be oriented towards increasing HOTS through various media development learning, learning materials, learning models, and strategies. This study concludes that the HOTS score of students was still very low and needs to be improved.

The purpose of this research is: 1) to develop the model and produce the assessment of creative curriculum-based learning program multiple intelligences (MI), 2) to know the characteristics and impacts of developed product models. Research using multi-years by method R & D (Research and Development) with two phases; First phase: 1) Preliminary survey stage, 2) definition stage, 3) design phase, 4) trial stage, and 5) development stage; The second phase: 1) the instrument design stage through the Forum Group Discussion, 2) the product trial phase of 100 children in Sleman Regency, 3) wide-scale implementation of 200 children in Yogyakarta Province, 4) the evaluation phase with construct analysis and achievement of research subjects' performance, 5 ) the stage of measuring the effectiveness of the product with user perception. The subject comprises 200 children of early childhood and 20 kindergarten teachers in 10 kindergartens in the Yogyakarta province in Indonesia, by the approach of Reflective Measurement Theory (RMT). The results showed that: 1) the MI-based creative curriculum assessment model was developed to meet valid, reliable and conformity criteria of an empirical data model, 2) The implementation of the assessment model had fulfilled the requirements worthy of using three criteria  aspect; 1) The results of the assessment using creative instruments based on multiple intelligences on children get "very good" results, 2) the readiness of the teacher in learning is included in the "good" category; 3) teacher performance appraisal shows the "very good" category, and 4) the benefits of the products developed are in the "very good" category. It was concluded that the developed product had tested empirically and practically so that it was useful in learning in early childhood.

In the last decade, learning from computer-supported collaborative technologies has been combined with social media (SM) and this has gotten a lot of attention. Also, there is a growing body of literature that suggests that SM is gaining a lot of attention because it has the perceived pedagogical affordances that could be used as a potential tool for teaching and learning. These perceived pedagogical affordances allow people to interact, communicate, collaborate and share resources among others. Most of the studies published on SM in education have focused on higher education (colleges and universities) with a relatively small body of literature on secondary education. Despite the wide use of SM in education, its benefits are still not clear across studies. We conducted a systematic literature review using the EBSCOhost database. Screening of abstracts and full texts resulted in the selection of 10 papers for the review. Seven approaches to using SM in learning in high schools have been identified: (1) interaction, (2) information dissemination, (3) communication, (4) collaboration, (5) teaching, learning, and resource sharing, (6) socialization, and (7) entertainment. Most of the articles claimed that the educational use of SM has a strong positive effect on social skills, but the evidence presented was rather weak. Subject-specific outcomes were not in focus in using SM in education. All studies followed a constructivist philosophical perspective. Based on this we provide a theory-based scenario for using SM in learning social skills and subject-specific outcomes.

A positive learning environment can be achieved if all the school members follow the principal's learning process. The paper aims to study and analyze the principal's implementation of innovation and entrepreneurial leadership in creating a learning environment. The research is conducted qualitatively through a case study. The research subjects were determined using purposive sampling, while the data were collected through interviews, observation, and documentation study. The data were then analyzed descriptively qualitatively using the Atlas.ti software. The results show that the principal has implemented the entrepreneurial leadership employing two main principles to create a learning environment. First, the principal regulates organizational growth through optimization, communication, motivation, monitoring, controlling, role model, and empowerment. The principal makes some innovation through several steps: vision building, staff development, and restructuring. This kind of leadership can create a comfortable and fun learning environment. As a result, all school members can follow the learning process and create innovative products, as well as making some progress in academic and non-academic achievements. The research findings imply a recommendation for the school's program in that a principal's entrepreneurial and innovative leadership is one of the critical factors in learning.

The purpose of the study is to identify how the instructional model influences students’ reflective disposition and how the students perceived the intervention. The study addressed the research questions through the ‘Artistic Reflection Scale’ for student pre-school educators that consisted of four domains such as students’ observation skills, critical analysis skills, evaluation skills, and the occupation application of artistic reflection, and the course satisfaction questionnaire. The study found that the technology of artistic reflection and image creation was effective in fostering students’ artistic reflective thinking comprising observation skills, critical analysis, their art output evaluation skills with a focus on sharing their reflective experience with the preschoolers. The artistic reflection scale was proved to be a reliable instrument in measuring students’ reflective thinking skills. The study found a change in the artistic reflective skills of the experimental group students was substantially greater than in the students of the control group. After the intervention, there was a shift from the basic level of artistic reflection to the higher levels in the experimental group students, and the proportion of the students being at this stage reduced, while the other proportions increased.

As a part of learning process, project-based assessment (PBA) is determined to be a potential approach in higher education evaluation that focuses on developing the important objectives related to critical thinking, team working and problems solving skills. The aim of the paper is to find out students’ reflection and teachers’ beliefs towards using this project-based assessment method in teaching Intercultural Communication Competence (ICC). To collect the data, a project-based assessment design was applied for 124 English major students at B University in the 9 weeks ICC course. This project was implemented from the beginning of the course, and at the end of the course, learners’ products were performed with specific activities regarding culture knowledge competition, online cultural community activities, talent performance, situational judgment ability, and eloquence skills. In addition, a set of questionnaires were delivered to the participants, plus the interviews with 36 teachers who have taught culture-related subjects from the universities in Vietnam, Thailand and Malaysia. The findings revealed that although there were certain challenges, using project-based assessment in teaching culture had satisfactory effects on students’ intercultural competence, problem- solving skills, critical thinking, and learning motivation.

This study addresses the effectiveness of learning via educational software. Recent decades have seen the integration of technologies, which are changing teaching and transforming teachers into mediating, facilitating, and guiding figures by means of digital learning methods that serve as a major tool in schools, colleges, and universities. The current study focuses on instruction provided within the Israeli Air Force and examined the effectiveness of instruction provided via educational software in terms of learning products: Bloom’s revised taxonomy, Te’eni’s affective-cognitive model of organizational communication and the STEM model. We randomly divided the learners into three groups who studied the same topic: one group studied with the educational software only, the second with the educational software together with an instructor, and the third with an instructor who used a presentation. The learners took a test and four months later they took another test to examine the effectiveness of the instruction over time. The research results show that the recall levels and performance levels on the tests were almost identical in all groups, but in the categories of understanding and applying the addition of an instructor strongly contributed to achievements: Those who received instruction via educational software achieved the best results in the understanding category, while those who studied with an instructor who used a presentation achieved the best results on the test with regard to application of the studied material. The findings of this study can illuminate the effectiveness of using educational software in learning processes in all educational systems.

The aims of the recent study were; analyzing the effect of creative and online learning using Instagram on the ability to create new products in the technology and learning media course, and determining the level of users’ experience in processing visual media through the Canva application on android. Quantitative approach with this research was carried out through a quasi-experimental research model because it measured the post-test was applied to 58 students as the respondents in two experimental and control classes. This study used two instruments; the cognitive learning outcome questionnaire according to the subject to get the students’ ability to create new products, and the second instrument was taken from ueq-online.org in the Indonesian version to know the users' experience in processing visual media. The data were analyzed using one-way ANOVA, mean and standard deviation assisted by IBM SPSS Statistics 24.0. The results demonstrated that the effect of creative and online learning using Instagram on the ability to create new products in The Technology and Learning Media course was found significant at 0.028 <0.05 which meant it could be applied well. Meanwhile, the level of users' experience in processing the visual media application Canva on Android had the highest score on the Stimulation scale at 1.59, categorized "Very Good" and the lowest score was on the Novelty scale at 0.93, categorized "Above Average". With the strong creative encouragement to create new products, the students were able to process their own visual media which were tailored to the agreed digital visual designs and were published on Instagram.

Development research demands a improvement in the implementation of learning by developing products based on learning needs. The products of this development are teacher book and student book based on the realistic mathematic education (RME) approach for package A in statistics material. Validity testing in this study includes instrument validation, self-evaluation, expert validation, one-to-one evaluation. Aiken's V and Intraclass Correlation Coefficient (ICC) are used to determine the validity and reliability of the product. The result of research shows that the instruments and prototype are valid and feasible. Then, the ICC obtained moderate stability, it also categorize reliable. In terms of context and hypothetical learning trajectory (HLT) developed, the products should be revised to achieve meaningful learning.

Ursula von der Leyen identifies diverse classrooms have different knowledges and ‘epistemologies’. A typology of epistemologies for democratising knowledge ‘A Blueprint for Character Development for Evolution’ (ABCDE) is offered to mainstream policy benefits for all by Higher Education as hubs i) credentialing educational leaders by doctoral-study and ii) propelling networks of Professional Educators and Administrators Committees for Empowerment (PEACE) across professions credentialed by Higher Education and chaired by educational leaders. PEACE builds robust evidence bases to inform redesigning curriculums and culturally responsive pedagogies as policy benefits that empower students to use ABCDE with Assessment for Personal and Social Learning (APSL) to problem solve across the quadruple-helix. Education Outcomes include students’ self-management of personal and social understanding and wellbeing for resilience within sustainable circular, entrepreneurial, green and digitised economies with products and means of production regulated by professions credentialed by Higher Education. Impacts include communities developing responsible historical social consciousness to reinvigorate democratic governance, accountability, transparency, effectiveness and trustworthiness of rule-of-law based institutions and policies to expand active and inclusive citizenship empowered by safeguarding human rights. Further research, building on the powerful European Commission funded platform ‘DocEnhance’ is recommended to inform effective and efficient investment into high quality education and training.

The teaching of experimental sciences in high school contributes to the development of a set of cognitive, methodological, and psychomotor skills among learners. Combining, both theoretical and practical aspects, it involves an important use of scientific experiments in the process of knowledge construction. With the help of appropriate tools that include interviews and observation of teaching practices, data related to the constraints encountered in the implementation of scientific experiments in the high school life sciences classroom was collected as well as proposals of solutions to overcome these constraints. The results show the existence of a set of constraints that oppose the realization of experiments in class. These constraints are not only limited to insufficient or deficient external factors but also to the teachers' relationship to knowledge which influences their choice of teaching activities within a predefined curriculum.

Graduates of higher education need, in addition to knowledge, skills such as cooperation, communication, and problem-solving to cope with their working life. Collaborative learning environments like co-creation, are gaining attention for their ability to cultivate these essential skills. This study aims to investigate the understanding and efficacy of co-creation from the perspective of 145 undergraduate students enrolled in a physics course, using a questionnaire. Design thinking, using the double-diamond model, is applied as the co-creation methodology. The study examines the effects of co-creation and design thinking on teamwork and the development of skills. The study also discusses the differences in co-creation, design thinking, teamwork, and skill development among various demographics, previous co-creation experiences, and teaching methods. The findings demonstrate that the majority of students understand the concepts of co-creation and design thinking, and that their co-creation teams functioned satisfactorily, leading to the development of necessary skills. However, increasing age seems to be an inhibiting factor. Finally, the study shows that students who prefer co-creation as a teaching method or have previous co-creation experiences are more receptive to this approach.

In the future, vocational students will face all changes and developments in technology and information. In this context, students' digital literacy skills need to be trained to adapt to the demands of the world of work. This article aims to present the results of a study on factors that can improve the digital literacy practice for vocational students as a roadmap for digital learning in the current era. The sampling technique used purposive random sampling of 8 Vocational Schools in East Java Province, Indonesia. The number of respondents in this study amounted to 355 second-year students. The study has found that online learning, motivation, and technology introduction are influenced by students' digital literacy practices, while teacher readiness and infrastructure must be mediated by online learning. The findings in this study indicate that collaboration from various parties is needed from teachers, school administrators, and policymakers in planning learning that focuses on students' digital abilities.

21st-century learning requires teachers and students to integrate literacy skills, scientific literacy, mathematics, reading, writing, and technology in the learning process. Students must have initiative, discipline, responsibility, confidence, motivation for independent learning, and the ability to think critically about the problems presented. This study aims to determine students' autonomous knowledge and critical thinking abilities (CTA) using mobile learning technology (MLT). This research is a quantitative study involving 83 students from four junior high schools in the city of Mataram. The data collection for independent learning and students' CTA was carried out by giving tests and non-tests to students. The test conducted was a written test in the form of a description of 10 questions covering indicators of CTA. The non-test was conducted by giving a student learning independence questionnaire with as many as 15 statements, including five indicators of learning independence. This quantitative research data analysis uses the Rash modeling application with the help of Ministep software. The analysis results show that the learning independence of male and female students in the four junior high schools obtained a percentage of 77.38% in the “good” category. Each indicator of learning independence accepts a percentage above 70%, which is in the excellent category. Meanwhile, the CTA of male and female students from the four junior high schools obtained 75.28% in the “good” category. Each indicator of CTA also gets a percentage of more than 70%, meaning that each indicator is in a good category.

In this article, we discuss the impacts of using 3D printing in education. Our primary goal is to evaluate the pedagogical impact of lessons utilizing 3D printing. We asked one hundred ninety students in four reference schools about the acceptability of existing 3D materials for teaching. Although the results show high attractiveness for the target group, it turned out that the available lessons primarily focus on the acquisition of technical skills and do not use the potential of education in other areas. We, therefore, proposed a concept for creating multidisciplinary teaching lessons that connect the technical part with other educational areas. We show the application of our concept in a newly developed lesson in biology, where we again evaluate its acceptance among the students. The results show that although the multidisciplinary lessons are more complex, they are still acceptable to the students, and, most importantly, they add significant educational value. Finally, we discuss the possibilities of incorporating 3D printing into the teaching curriculum. We also use a selected use case to illustrate the real-world problems we have encountered.